Post-tensioned slab strip to ACI 318-19 Ch. 7, 8, 20, 24
A post-tensioned one-way slab or a strip of a two-way slab by load balancing: hyperstatic moments, service stress class, transfer, strength with fps and minimum steel.
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished post-tensioned slab strip calculation
The applicable checks, step by step
Every check to ACI 318-19 Ch. 7, 8, 20, 24 with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the post-tensioned slab strip is tested
Against published examples and tables, on every change. The method and the sources.
Learn
Step by step
User manual: Post-tensioned slab strip
Every input, check and option of the calculation explained.
Video: Concrete: a simply supported beam
A 16 by 26 in. beam: why you read every row and not only the status bar, and what a stirrup spacing past its limit does. (1:42)
More concrete calculations
Run your next post-tensioned slab strip calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.