Wood truss
Pick a layout, span and pitch: roof and floor trusses in sawn lumber, chord axial and bending, webs, bearing and deflection, sized automatically to ANSI/TPI 1 and the NDS. Plates are not designed.
Preview. The app labels this calculation "Preview: not yet verified, do not rely on these results", on the screen, the report and the drawing, until its review is finished. What the results do and do not show.
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished wood truss calculation
The applicable checks, step by step
Every check with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the wood truss is tested
Against published examples and hand calculations from the code equations, on every change. The method and the sources.
Run your next wood truss calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.