Beam grid (grillage)
Beam grids in two directions with torsion: joint deflections, member moments, shears and torques.
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished beam grid (grillage) calculation
Every step shown
Each result with its equation, the values that go into it and, where there is one, the code section. Results update as you type.
A calculation report a reviewer can follow
Inputs and every step with its result and reference, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the beam grid (grillage) is tested
Against hand calculations from the code equations, on every change. The method and the sources.
Run your next beam grid (grillage) calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.