Cold-formed steel girt to AISI S100-16 I6.2.1, ASCE 7-22 Ch. 30
C and Z wall girts under wind pressure and suction, through-fastened or braced at sag rods, on simple or continuous spans: bending, shear, sag rods and deflection (AISI S100-16).
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished cold-formed steel girt calculation
The applicable checks, step by step
Every check to AISI S100-16 I6.2.1, ASCE 7-22 Ch. 30 with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the cold-formed steel girt is tested
Against hand calculations from the code equations, on every change. The method and the sources.
Run your next cold-formed steel girt calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.